1. The antenna must be installed according to the corresponding mark on the host before powering on the host.
2. The effective coverage of the jammer is a circular area centered on the jammer, so when using it, pay attention to the correct placement of the Texin electronic jammer to avoid blind corners; if it is a directional antenna, it can be based on the antenna standard fan angle Adjust the alignment target direction.
3. The signal jammer device should be placed in a well-ventilated place, avoid large objects as much as possible, and avoid strong electromagnetic sources of strong heat sources to ensure the shielding effect and long-term stable work.
4. When the jammer is working, it is not allowed to stack other objects and disassemble the antenna, so as not to affect the shielding effect and damage the machine.
5. When the jammer is not in use, the power supply should be cut off in time to avoid affecting the normal use of the mobile phone.
6. When using the shielding device outdoors, pay attention to dust and waterproof. Keep away from corrosive gases and liquids, and do a good job of preventing dust and moisture, so as not to accelerate the aging of the internal components of the equipment
7. When the area of the site used is larger than the effective shielding range, it is recommended to use multiple shields for honeycomb installation to ensure the shielding effect.
8. Since the power supply and antenna are dedicated to the host, and are debugged one-to-one during factory debugging, please try not to use them interchangeably to ensure good results.